Fixed Seat Post; Adjusting The Seat Height - Permobil C400 Service Manual

Fixed seat post

Fixed seat post

Adjusting the Seat Height

The length of the fixed seat post can be adjusted
to five different fixed positions.
1. Switch off the main power switch on the control
panel.
2. Loosen the screw that locks the fixed height
position of the seat post. See figure.
3. Raise the seat using the seat elevator crank
supplied.
4. Screw the height adjustment screw in place in
the desired height position.
5. Lower the seat using the seat elevator crank
supplied. Turn the seat so that the height
adjustment screw ends up in its groove. See
fig.
m
CAUTION
After adjusting, make sure the height adjustment screw ends
up in its groove.
On early models of the chassis, the fixed seat tube has only
four positions.
Adjusting the Seat Height using the seat elevator crank.
2
1. Locking screw .
2. Height adjustment screw in its groove.
The length of the fixed seat post can be
adjusted to five different fixed positions.
36
1