Need Help - Matrox Iris GT with MIL Manual

20 Chapter 1: Before you begin
To determine how to use the Matrox breakout board, refer to Appendix F: The
Matrox breakout board. Additional connection modules are described in
Appendix E: Connection modules.
To restore the contents of the flash disk of your Matrox Iris GT to its
factory-configured contents and setup, refer to Appendix G: Restoring your
Matrox Iris GT to factory defaults.
To determine the XPConfig command-line options and how to use them, refer
to Appendix H: XPConfig command-line options.
To update the BIOS of your smart camera, refer to Appendix I: Using the AMI
Firmware Update utility.
To determine more about the 5 V Input version of Matrox Iris GT, refer to
Appendix J: Using a version of Matrox Iris GT that accepts 5 V auxiliary input signals.
For the key feature changes for specific versions and revisions of the
Matrox Iris GT smart cameras, refer to Appendix K: Listing of Matrox Iris GT
smart cameras.

Need help?

Additional help can be found on the support page of the Matrox Imaging website:
http://www.matrox.com/imaging/support. This page provides answers to
frequently asked questions, as well as offers registered customers additional ways
of obtaining support.
If your question is not addressed and you are registered, you can contact technical
support. To do so, you should first complete and submit the online Technical
Support Request Form using the gathered information, accessible from the
above-mentioned page. Once the information is submitted, a Matrox support
agent will contact you shortly thereafter by email or phone, depending on the
problem.