Table of Contents
Advertisement
10 Chapter 1: Before you begin
Introduction
The Matrox Iris GT with MIL combines the integration of a conventional smart
camera with the flexibility of a traditional PC-based machine vision system.
Matrox Iris GT is a fully programmable device, allowing extensive customization.
This manual deals with operating your Matrox Iris GT under Microsoft Windows
XPe.
Matrox Iris GT features an Intel-architecture processor and Microsoft
Windows XPe. Matrox Iris GT uses an interline transfer, progressive scan, CCD
image sensor with square pixels. The sensor provides an externally triggered
electronic shutter.
Matrox Iris GT is fully integrated in an IP67 enclosure, eliminating the need to
separately source a sealed camera housing, while still providing easy access to the
lens.
The Intel-architecture processor is an Intel Atom 1.6 GHz processor with an Intel
SCH companion interface bridge. The 2-Gbyte flash disk provides in-camera
(on-board) storage for both the operating system and additional data. The
1024 Mbytes of DDR2 memory provide in-camera (on-board) volatile storage.
Matrox Iris GT can connect to an analog RGB display device, and can
communicate with other devices through the Ethernet (100/1000 BaseT), RS-232
serial port, VGA/USB port, and user-defined digital I/O signals.
Advertisement
Table of Contents
