Open-Wire Connectors Reference; Matrox Camera Connector - Matrox Iris GT with MIL Manual

126 Appendix F: The Matrox breakout board
Matrox breakout board connector name

Matrox camera connector

Power source connector
Output connector
Input connector

Open-wire connectors reference

The Matrox breakout board has four separate cable connectors (see A, B, C and
D in the diagram at the beginning of this appendix) designed for open-wire
connections. Each connector is composed of multiple wire terminals. Each of these
wire terminals requires a stripped cable to be inserted, wire by wire, into the
available holes. Each wire terminal is numbered J1 though J39 on the board.
Wire
terminal
J1-J17
J19-J20
J21-J30
J32-J39
Matrox camera connector
The Matrox camera connector is a series of 17 wire terminals. It connects to the
digitial I/O and power connector of your Matrox Iris GT, using the open-wire
digital I/O and power cable that comes with the Matrox Iris GT starter kit. Each
wire terminal receives a wire with a color corresponding to the color listed on the
Matrox breakout board. This connector provides power to your Matrox Iris GT,
receives Matrox Iris GT auxiliary output signals and controlled-current output
(CCS), and transmits auxiliary input and trigger signals to your Matrox Iris GT.
This connector can also receive and transmit RS-232 messages.
J17 J16 J15 J14
Connector type
Connects your Matrox Iris GT to the Matrox breakout board via the digital I/O
and power cable.
Provides power to the Matrox breakout board.
Connects to a third-party devices so that they can receive auxiliary output
signals and controlled-current output (CCS) from your Matrox Iris GT.
Connects to a third-party device so that they can send auxiliary input and
trigger signals to your Matrox Iris GT.
J13 J12 J11 J10 J9 J8 J7 J6 J5 J4 J3 J2 J1