Routing Matrox Iris Gt Output Signals - Matrox Iris GT with MIL Manual

Routing Matrox Iris GT output signals

There are five ways to route a Matrox Iris GT output:
• Route a Matrox Iris GT auxiliary output signal to a third-party device.
• Route an auxiliary output signal (strobe signal) from your Matrox Iris GT to a
lighting controller.
• Route the controlled-current output from your Matrox Iris GT to a LED lighting
device.
• Route a Matrox Iris GT auxiliary output signal to a Matrox Iris GT auxiliary input
signal. See the Routing a Matrox Iris GT auxiliary output signal to a Matrox Iris GT
auxiliary input signal subsection of the Routing input signals to Matrox Iris GT
section, earlier in this appendix.
• Route Matrox Iris GT auxiliary output signal 4 (AUX(STB)_OPENC_OUT4)
to the Matrox Iris GT trigger signal (TRIG_OPTO_IN+). See the Routing one
Matrox Iris GT auxiliary output signal to the Matrox Iris GT trigger signal subsection
of the Routing input signals to Matrox Iris GT section, earlier in this appendix.
Routing Matrox Iris GT output signals
Equivalent
circuit only
Input
selector
Output
router
Output connector
Third-party device
(output-receiving)
115