Memory Allocation - Matrox Iris GT with MIL Manual

Matrox Iris GT feature GT300
Non-paged memory size 16 Mbytes
The MIL/MIL-Lite run-time files are also included in the Windows XPe
configuration.
❖ Note that, in general, you will need to use the Windows XP Control Panel to
configure settings. To access the Control Panel, use the Windows Settings Control
Panel menu command from the Windows Start menu. Refer to the Windows XPe
help file for more information on using the various Control Panel utilities. In some
cases, however, you will have to use the BIOS Setup utility to make certain
configuration changes.

Memory allocation

By default, MIL reserves a specific amount of non-paged (DMA) memory for its
grab buffers. The remaining memory is available for use by the operating system.
GT300C
32 Mbytes
For instance, a Matrox Iris GT 300C has 1 Gbyte of memory (that is,
1024 Mbytes), whereby the memory allotted for MIL is 32 Mbytes. Therefore,
the memory allotted for the Windows XPe operating system is 988 Mbytes (plus
4 Mbytes allotted for display memory).
To change the amount of non-paged memory reserved by MIL, run the
MILConfig utility on your Matrox Iris GT. For more details on this utility, refer
to the MIL User Guide.
Matrox Iris GT feature list under Windows XPe
GT1200 GT1200C
16 Mbytes 64 Mbytes
GT1900 GT1900C
28 Mbytes 64 Mbytes
37
GT5000
64 Mbytes