Table of Contents
Advertisement
12 Chapter 1: Before you begin
This manual discusses using the Matrox Iris GT with the Matrox breakout board;
for information on how to use it with the Matrox Breakout Box module, refer to
the Matrox Breakout Box Installation and Technical Reference manual.
Inspecting your Matrox Iris GT with MIL
package
You should check the contents of your Matrox Iris GT with MIL package when
you first open it. If something is missing or damaged, contact your Matrox
representative.
Base package
If you have purchased Matrox Iris GT with MIL, your package should include
the following:
• Matrox Iris GT smart camera. This includes a run-time license for MIL for
Windows XPe.
• Matrox Iris GT Windows XPe Rescue Utility DVD.
❖ Note that your Matrox Iris GT base package does not include any cables, a power
supply, or a manual iris lens. To purchase these items, refer to the Matrox Iris GT
starter kit, described later in this section, or contact a Matrox sales representative.
Matrox Iris GT starter kit
The Matrox Iris GT starter kit includes the following:
• Power supply.
• 100/1000 BaseT Ethernet cable with an M12 8-pin (male) connector on one end
and an RJ-45 registered jack on the other. This cable is meant to connect your
Matrox Iris GT to another computer or network device.
• Digital I/O and power cable with an M12 17-pin (female) connector on one end
and open ended wires on the other. This cable is meant to connect your
Matrox Iris GT to power and third-party digital I/O devices.
Advertisement
Table of Contents
