Action Control Example - JAI GOX-2402M-PGE User Manual

GOX-2402MC-PGE | GOX-3201MC-PGE | GOX-5103MC-PGE | GOX-8901MC-PGE | GOX-12401MC-PGE

Action Control Example

Assume that the following settings have been pre-configured on the camera.
ActionDeviceKey : 0x00001001
l
ActionGroupMask[1] : 0x00000011
l
ActionGroupKey[1] : 0x00000001
l
ActionGroupMask[2] : 0x00000111
l
ActionGroupKey[2] : 0x00000002
l
When the camera receives action commands (ActionDeviceKey:0x00001001,
ActionGroupMask:0x00000011, ActionGroupKey: 0x00000002), Action2 is executed.
When the camera receives action commands (ActionDeviceKey:0x00001001,
ActionGroupMask:0x00000011, ActionGroupKey: 0x00000001), ActionDevice and ActionGroupKey
[1] match. However, the result of AND operation performed by ActionGroupMask is 0. Therefore, in
this case, neither Action1 nor Action2 is executed.
User Manual (Ver. 1.5) - Main Functions
- 82 -