Digitaliocontrol - JAI GOX-2402M-PGE User Manual

GOX-2402MC-PGE | GOX-3201MC-PGE | GOX-5103MC-PGE | GOX-8901MC-PGE | GOX-12401MC-PGE
Acquisition Control
Items
ExposureAuto
ExposureModeOption
Related Topic:
RCT Mode

DigitalIOControl

Configure settings for digital input/output.
Related Topic: GPIO (Digital Input/Output Settings)
Digital IO Control
Items
21: Line2 Opt Out1
24: Line5 Opt In1
60: Nand0 In1
LineSelector 61: Nand0 In2
62: Nand1 In1
63: Nand1 In2
255: TimestampReset
0: Off
1: AcquisitionActive
2: FrameActive
4: ExposureActive
5: FVAL
7: PulseGenerator0
11-14: UserOutput0-3
24: Line5 Opt In1
LineSource
36: Nand0 Out
37: Nand1 Out
40: -
41: Low
42: High
43:
AcquisitionTriggerWait
44: FrameTriggerWait
Setting Range Default
0: Off
1:Once 0: Off
2:Continuous
0: Off
0: Off
1: RCT
Setting Range
21: Line2 Opt
Out1
User Manual (Ver. 1.5) - Setting List (Feature Properties)
Set whether to enable auto exposure. When set to Once, the
automatic adjustment will be performed only once, and then
automatically switched to Off.
Enables RCT mode.
Default
Select the input/output to configure.
Select the line source signal for the item selected in LineSelector.
Line5 Opt In1: Fixed to "-"
0: Off: Only when LineSelector=TimestampReset
40: - : Not selectable for Output
-
Default
LineSelector =TimestampReset: Off(0)
LineSelector = Line2 Opt Out1: ExposureActive(4)
LineSelector = Other than above: Low(41)
- 97 -
Description
Description