Setting List (Feature Properties); Selector - JAI GOX-2402M-PGE User Manual

Cmos digital progressive scan monochrome and color camera with gige interface
Hide thumbs Also See for GOX-2402M-PGE:
Table of Contents

Advertisement

GOX-2402MC-PGE | GOX-3201MC-PGE | GOX-5103MC-PGE | GOX-8901MC-PGE | GOX-12401MC-PGE

Setting List (Feature Properties)

This camera complies with GenICam. Each setting item name conforms to GenICam SFNC (Standard
Features Naming Convention). (There are some JAI-specific setting items).
Each setting item is an integer type (IInteger), a real type (IFloat), an element enumeration type
(IEnumeration), a character string (IString), a logical type (IBoolean), and a category type (ICategory)
or a command type (ICommand) for executing the function.
Beginner: For beginner users.
Expert: For users with deep knowledge of camera functions.
Guru: For advanced users who make settings, including advanced features that can cause the
camera to malfunction if not set correctly.

Selector

A Selector is used to index which instance of the feature is accessed in situations where multiple
instances of a feature exist.
Instance Example:
Each Line-related item (LineSource, LineInverter, etc.) has LineSelector-LineX instances, which can
be set or referenced as an index.
Selectors are a feature of element enumeration type (IEnumeration) or an integer type (IInteger).
However, unlike normal configuration items, it is only used to select the instance in the following
configuration item.
It does not change the behavior of the camera by changing the value of the selector. Also, the selector
may have only one selectable value. In this case, use the selector function only for information
purposes. In this document, it is described as SelectedFeature[Selector] according to the description
method of GenICam.
In the case of Line Selector with a specific I/O line selected, the description could be as follows.
LineSource[LineSelector-LineX] = High
LineInverter[LineSelector-LineX] = False
LineMode[LineSelector-LineX] = Input
LineFormat[LineSelector-LineX] = TTL
Generally, selectors only apply to a single category of features. (Example: TriggerSelector only
applies to trigger related functions.)
User Manual (Ver. 1.5) - Setting List (Feature Properties)
- 84 -

Advertisement

Table of Contents
loading

Table of Contents