JAI GOX-2402M-PGE User Manual page 96

GOX-2402MC-PGE | GOX-3201MC-PGE | GOX-5103MC-PGE | GOX-8901MC-PGE | GOX-12401MC-PGE
Acquisition Control
Items
0: Low
1: High
2: Software
10:
PulseGenerator0
TriggerSource 14-17:
UserOutput0-3
18-19: Action0-1
21: Line5 Opt In1
26: Nand0 Out
27: Nand1 Out
1:Rising Edge
2:Falling Edge
TriggerActivation
3:Level High
4:Level Low
0: Off
TriggerOverlap
1: ReadOut
TriggerDelay 0 - 500000
ExposureMode
0: Off
1: Timed
Related Topic:
2: TriggerWidth
Exposure Mode
ExposureTime (us)
Related Topic:
Actual Exposure
Time
Setting Range Default
21: Line5 Opt In
1:Rising Edge
0
1: Timed
1 ~
User Manual (Ver. 1.5) - Setting List (Feature Properties)
Select the trigger signal source.
Select the polarity of the trigger signal (i.e., location of signal at
which trigger is applied).
Select the trigger overlap operation.
TriggerSelector = AcquisitionStart / AcquisitionEnd /
-
AcquisitionTransferStart 0:Off (Fixed)
TriggerSelector=FrameStart: 1:ReadOut (Fixed)
Set the time of exposure start from trigger input. (unit: μs)
Select the exposure mode.
Set the exposure time (us). The maximum exposure time varies
depending on the AcquisitionFrameRate setting.
Note: The actual exposure time will consist of the image
sensor's offset duration added to the ExposureTime setting.
See Actual Exposure Time
duration.
-
Default:
GOX-2402MC-PGE: 19929
GOX-3201MC-PGE: 27195
GOX-5103MC-PGE: 43408
GOX-8901MC-PGE: 76629
GOX-12401MC-PGE: 106548
- 96 -
Description
for each camera model's offset