Roi Function (Single Roi) - JAI GOX-2402M-PGE User Manual

GOX-2402MC-PGE | GOX-3201MC-PGE | GOX-5103MC-PGE | GOX-8901MC-PGE | GOX-12401MC-PGE
ROI Function (Single ROI)
Related Setting Items:
The ROI (region of interest) function allows you to output images by specifying the areas to scan.
Specify the area to scan by specifying width, height, and horizontal/vertical offset values under
ImageFormatControl.
You can increase the frame rate by specifying a lower height, as the number of lines scanned
decreases. The setting ranges for the ROI function's readable area based on the Binning setting
(BinningHorizontal, BinningVertical) are as follows.
Notes:
The Binning Function
l
This function cannot be used together with
l
Width/OffsetX (Pixels)
Width BinningHorizontal = 1
OffsetX
Width 96 to [(*A) - OffsetX],
(pixels) step 16
Offset X 0 to [(*A) - Width], step
(pixels) 16
Height/OffsetY (Lines)
Height BinningVertical = 1
OffsetY
Height 8 to [(*C) - OffsetY],
(lines) step 2
OffsetY 0 to [(*C) - Height],
(lines) step 2
ImageFormatControl
can only be used for monochrome camera models.
BinningHorizontal =
(OFF)
48 to [(*B) - OffsetX],
step 8
0 to [(*B) - Width],
step 8
BinningVertical = 2
(OFF)
4 to [ (*D) - OffsetY],
step 1
0 to [ (*D) - Height],
step 1
Decimation Mode
2 (ON)
GOX-2402MC-PGE
GOX-3201MC-PGE
GOX-5103MC-PGE
GOX-8901MC-PGE
GOX-12401MC-PGE
(ON)
GOX-2402MC-PGE
GOX-3201MC-PGE
GOX-5103MC-PGE
GOX-8901MC-PGE
GOX-12401MC-PGE
- 71 -
User Manual (Ver. 1.5) - Main Functions
*A,B = WidthMax
1920
2048
2448
4096
4096
*C, D = HeightMax
1200
1536
2048
2160
3000
A B
960
1024
1224
2048
2048
C D
600
768
1024
1080
1500