Table of Contents
Advertisement
GOX-2402MC-PGE | GOX-3201MC-PGE | GOX-5103MC-PGE | GOX-8901MC-PGE | GOX-12401MC-PGE
Calculate the Maximum Frame Rate (Approximate)
Related Setting Items:
Note: The Frame Rate Calculator, which calculates the maximum frame rate or trigger rate, is
available for download from the product page on the JAI website (www.jai.com).
This section describes how to calculate the maximum frame rate (approximate). The maximum frame
rate is as follows depending on the sensor's scanning range and the GigE bandwidth.
The Maximum Frame Rate (GigE Bandwidth)
Interface_FR[Hz] = BandwidthPerPixelFormat x 1000000 ÷ (Width x Height)
Note: When using the
Binning for the Width and Height values.
The Maximum Frame Rate (Sensor's Scanning Rate)
Sensor_FR[Hz] = 1000000 ÷ (H_Period x (Height-S + InvalidLine) )
H_Period = MAX(HMAX_Period, HMAX_Width)
HMAX_Width = (PixelSizeCount / 111375) x Width-S
Notes:
For the values of Width-S and Height-S, specify the number of pixels read from the sensor
l
and the number of lines. (Number of pixels and number of lines before Binning).
In GOX-2402M-PGE, 2x2 binning is processed on the image sensor. Therefore, the
l
maximum sensor frame rate can be increased. In this case, for the values of Width-S and
Height-S, specify the number of pixels and the number of lines after Binning.
Please refer to tables below for PixelSizeCount, BandwidthPerPixelFormat, HMAX_Period and
InvalidLine.
Mono8, Bayer8
Mono10Packed, Mono12Packed, Bayer10Packed,
Bayer12Packed
Mono10, Mono12, Bayer10, Bayer12
AcquisitionControl
Binning
Function, specify the number of pixels and number of lines after
PixelFormat
User Manual (Ver. 1.5) - Main Functions
PixelSizeCount BandwidthPerPixelFormat
594
891
1188
- 45 -
115
76.6
57.5
Advertisement
Table of Contents
