Table of Contents
Advertisement
GOX-2402MC-PGE | GOX-3201MC-PGE | GOX-5103MC-PGE | GOX-8901MC-PGE | GOX-12401MC-PGE
When using SequencerWidth / SequencerHeght, set the Width and Height to the default
l
values in advance.
TriggerSequencer Mode
With this mode, the Sequencer Trigger "pattern" is predetermined by the user. The user defines up to
32 different "indexes." Different camera settings can be configured for each index. The operation of
this mode is controlled using the following five commands.
Caution:
In TriggerSequencer mode, the TriggerOverlap function of the FrameStart trigger is
disabled and the operation is always Off.
SequencerSetActive: This allows you to confirm the index number displayed on the next trigger
reception.
SequencerSetStart: This configures the index number to execute at the start of TriggerSequencer
mode.
SequencerReset: During TriggerSequencer mode operation, this switches the index number to be
executed to that specified in SequencerSetStart.
SequencerRepetition: This parameter applies to TriggerSequencer patterns which include an index
whose SequencerROINextIndex is set to 0 (OFF).
When the index whose SequencerROINextIndex is set to 0 (OFF) is finished executing, the value of
Sequencer Repetition (range = 1 ~ 255) is decremented internally. If the result of the decrement is not
zero, the TriggerSequencer pattern starts over from the index specified in SequencerSetStart. If the
result of the decrement is zero, the status changes to Acquisition Stop and external triggers are not
accepted.
User Manual (Ver. 1.5) - Main Functions
- 75 -
Advertisement
Table of Contents
