Table of Contents
Advertisement
GOX-2402MC-PGE | GOX-3201MC-PGE | GOX-5103MC-PGE | GOX-8901MC-PGE | GOX-12401MC-PGE
Adjust the Gain
Adjust the image quality using the gain and white balance functions. The Visibility must be changed
from Beginner to Guru.
Note: For details on the Gain control, see
Manual Adjustment
1. Expand AnalogControl and set GainAuto to Off (Default = Off).
2. Select the gain you want to configure in GainSelector. AnalogAll (master gain), DigitalRed*
(digital R gain), and DigitalBlue* (digital B gain) can be configured.
3. Configure the Gain.
DigitalAll (master gain) can be set to a value from x1 to x126 the analog gain value. The
l
resolution is set in about 0.1dB steps. Values are configured by multipliers.
The DigitalRed* (digital R gain) and DigitalBlue* (digital B gain) can be set to a value from
l
x0.447 to x5.624. Values are configured by multipliers.
Note: *Color models only.
Gain Control
in the Main Functions chapter.
- 30 -
User Manual (Ver. 1.5) - Preparation
Advertisement
Table of Contents
