Acquisition Control - JAI GO-5000M-PGE User Manual

GO-5000M-PGE | GO-5000M-PGE-UV | User Manual (Ver. 2.0)

Acquisition Control

Acquisition control contains the following commands.
Command
Single Frame
Multi Frame
Acquisition Mode
Continuous
No (EXE
Acquisition Start
command)
No (EXE
Acquisition Stop
command)
Acquisition Frame
1 ~ 255
Count
Acquisition Frame 0.125 to Maximum
Rate FrameRate
Acquisition Frame 8sec to Minimum
Rate Raw FramePeriod
Parameter
One frame can be output by AcquisitionStart command
The number of frames which is specified in Acquisition Frame Count,
are output by AcquisitionStart command
Images are continuously output by AcquisitionStart command until
AcquisitionStop command is input.
Start Acquisition
Stop Acquisition
Set the number of frames to be used in Multi Frame mode.
Set the frame rate in fps value
Set the frame rate in Frame period (μs)
Description
- 49 -
Main Functions