GOX-2402MC-PGE | GOX-3201MC-PGE | GOX-5103MC-PGE | GOX-8901MC-PGE | GOX-12401MC-PGE
Chunk Data Function
Related Setting Items:
The Chunk Data function adds camera configuration information to the image data that is output from
the camera. In addition, when images are shot with a single camera in sequence under multiple setting
conditions, you can search for images by their setting conditions.
Configuring Chunk Data
1. Set ChunkModeActive to True.
Caution:
The Chunk Data function settings cannot be changed during image output. To change
the settings, stop Acquisition.
Event Control Function
Related Setting Items:
The Event Control function is a function that outputs a signal change point inside the camera as
information indicative of an event occurrence (event message).
Flow from Detecting an Event to Sending an Event Message
Events That Can Use the Event Control Function
Events that can use the Event Control function are as follows. You can specify whether or not to send
an event message when an event occurs at each event.
Supported Events:
AcquisitionTrigger, FrameStart, FrameEnd, ExposureStart, ExposureEnd
l
ChunkDataControl
EventControl
User Manual (Ver. 1.5) - Main Functions
- 80 -