Table of Contents
Advertisement
GOX-2402MC-PGE | GOX-3201MC-PGE | GOX-5103MC-PGE | GOX-8901MC-PGE | GOX-12401MC-PGE
BlemishControl
Configure settings for JAI white blemish correction.
Related Topic:
BlemishCompensation
Blemish Control Items
BlemishEnable
BlemishDetect
BlemishDetectionResult
BlemishStore
BlemishDetectThreshold
BlemishCompensation
Index
BlemishCompensation
PositionX
BlemishCompensation
PositionY
Setting Range Default
0: False
1:
Enable/disable blemish correction.
1: True
Enable
Execute blemish detection.
This command cannot be executed under the following conditions.
-
-
Display the blemish detection results.
-
0: Idle
Save the location information of detected blemishes, manually specified
-
-
by BlemishiCompensationPositionX and
BlemishCompensasionPositionY.
1 ~ 100 (%)
10
Set the blemish detection threshold.
1 ~ 256
1
Select the index for the target blemish coordinates.
Display the X coordinate (horizontal pixel position) of the target blemish
-1 ~
-1
selected in BlemishCompensationIndex. You can also manually enter
(WidthMax -1)
the X coordinate of the blemish you want to correct.
-1 ~
Display the Y coordinate (vertical pixel position) of the target blemish
(HeightMax -
-1
selected in BlemishCompensationIndex. You can also manually enter
1)
the Y coordinate of the blemish you want to correct.
User Manual (Ver. 1.5) - Setting List (Feature Properties)
- No image is being output.
- TestPattern is being output
- In Sequencer Mode
(Sequencer
- The image is not full ROI size
- In Reverse mode
(Image Flip
- When an image is not displayed within the specified time in Acquisition
Start status
(Acquisition
Control)
- Not in lens cap state
0: Idle
1: Succeeded
3: Error2 - exceeded max compensation number
4: Error3 - could not detected
5: Error4 - timeout
- 108 -
Description
Function)
(ROI Function (Single
ROI))
Function)
Advertisement
Table of Contents
