Table of Contents
Advertisement
GOX-2402MC-PGE | GOX-3201MC-PGE | GOX-5103MC-PGE | GOX-8901MC-PGE | GOX-12401MC-PGE
③ LAN Cable
Connect a LAN cable to the RJ-45 connector.
Use a LAN cable that is Category 5e or higher (Category 6 recommended).
l
Use a LAN cable that is an STP cable.
l
When supplying power via PoE, connect to a PoE-compatible switching hub or a PoE-
l
compatible network card.
Note: JAI does not recommend using a PoE injector. If a PoE injector is used, the camera
may not be able to transmit images properly.
Refer to the specifications of the cable for details on its bend radius.
l
Caution:
See the
➃ Network Card
Install this in the computer that will be used to configure and operate the camera. As the camera
supports PoE, you can also use PoE-compatible network cards. Refer to the instruction manual of the
network card and configure settings on the computer as necessary.
⑤ DC IN / Trigger IN Connection Cable
Performs external I/O such as power supply and trigger input.
⑥ AC Adapter (Power Supply) (If Necessary)
Connect the AC adapter and the round connector of the connection cable to the DC IN / Trigger IN
connector on the camera.
Notes on LAN Cable Connection
User Manual (Ver. 1.5) - Preparation
topic as well.
- 24 -
Advertisement
Table of Contents
