Step 1: Install The Software (First Time Only); Step 2: Connect Devices - JAI GOX-2402M-PGE User Manual

GOX-2402MC-PGE | GOX-3201MC-PGE | GOX-5103MC-PGE | GOX-8901MC-PGE | GOX-12401MC-PGE

Step 1: Install the Software (First Time Only)

When using the camera for the first time, install the software for configuring and controlling the camera
(eBUS SDK for JAI) on the computer.
Note: When you install eBUS SDK for JAI, eBUS Player for JAI will also be installed.
1. Download the eBUS SDK for JAI from the JAI website
software).
2. Install eBUS SDK for JAI on the computer.

Step 2: Connect Devices

① Lens
③ LAN Cable
⑤ DC IN / Trigger IN Connection Cable
User Manual (Ver. 1.5) - Preparation
(https://www.jai.com/support-software/jai-
② Mounting (or Use MP-43 Tripod
Adapter Plate)
➃ Network Card
⑥ AC Adapter (Power Supply) (If Necessary)
- 21 -