Cleaning The Printer; Cleaning The Exterior - Xerox VersaLink B71 Series User Manual

Cleaning the Printer

C L E A N I N G T H E E X T E R I O R
Clean the exterior of the printer once a month.
• Wipe the paper tray, output tray, control panel, and other parts with a damp, soft cloth.
• After cleaning, wipe with a dry, soft cloth.
• For stubborn stains, apply a small amount of mild detergent to the cloth and gently wipe the stain off.
C C a a u u t t i i o o n n : :
Do not spray detergent directly on the printer. Liquid detergent could enter the printer through
a gap and cause problems. Never use cleaning agents other than water or mild detergent.
Cleaning the Scanner
To ensure optimum print quality, clean the document glass regularly. Cleaning helps avoid output with streaks,
smears, and other marks that transfer from the glass while scanning documents.
1. Slightly dampen a soft, lint-free cloth with water.
2. Remove any paper or other media from the output tray.
3. Open the document cover.
4. Wipe the surfaces of the document glass and CVT glass until they are clean and dry.
Note: For best results, to remove marks and streaks, use Xerox
5. Wipe the white underside of the document cover until it is clean and dry.
6. Close the document cover.
Xerox ® VersaLink ® B71XX Series Multifunction Printer User Guide
® Glass Cleaner.
Maintenance
193