Technical Data; Conformity; Standards; Licenses - Burkert 8695 Operating Instructions Manual

Type 8695

Technical data

6 TECHNICAL DATA
6.1

Conformity

In accordance with the EU Declaration of conformity, the control head Type 8695 is compliant with the EU Directives.
6.2

Standards

The applied standards on the basis of which compliance with the EU Directives is confirmed are listed in the EU-
Type-Examination Certificate and/or the EU Declaration of Conformity.
6.3

Licenses

The product is approved for use in zone 2 and 22 in accordance with ATEX directive 2014/34/EU category 3GD.
Observe instructions on operation in an explosion-risk (Ex) area.
Observe the ATEX additional instructions.
The product is cULus approved. Instructions for use in the UL area see chapter "6.8 Electrical data".
6.4

Operating conditions

WARNING!
Solar radiation and temperature fluctuations may cause malfunctions or leaks.
▶ If the device is used outdoors, do not expose it unprotected to the weather conditions.
▶ Ensure that the permitted ambient temperature does not exceed the maximum value or drop below the mini-
mum value.
Ambient temperature
Degree of protection
Evaluated by the manufacturer:
IP65 / IP67 according to EN 60529
Only if cables, plugs and sockets have been connected correctly and in compliance with the exhaust air concept see
1)
chapter "8 Pneumatic installation".
6.5

Mechanical data

Dimensions
Body material
Sealing material
see type label
Evaluated by UL:
UL Type 4x Rating
1) 1)
See data sheet
exterior
interior
exterior
PPS, PC, VA
PA6; ABS
EPDM / FKM
english
13