Network Topology Of A Devicenet System; Configuring The Control Head; Dip Switches - Burkert 8695 Operating Instructions Manual

Type 8695
DeviceNet installation
11.8

Network topology of a DeviceNet system

Line with a trunk line and several drop lines.
Trunk lines and drop lines consist of identical material (see "Figure 42").
V +
V –
CAN_H
CAN_L
Terminating
resistor
120 Ω
¼ W
Figure 42: Network topology - DeviceNet
11.9

Configuring the control head

11.9.1

DIP switches

Figure 43: DIP switches - DeviceNet
8 DIP switches are available for configuration:
• DIP switches 1 to 6 for the DeviceNet address
• DIP switches 7 to 8 for the baudrate
DANGER!
Risk of electric shock.
▶ Before working on equipment or device, switch off the power supply and secure to prevent reactivation.
▶ Observe applicable accident prevention and safety regulations for electrical equipment.
Drop lines
DeviceNet cable,
max. 6 m long
T01
Subscriber 1 (node 1)
1 2 3 4 5 6 7 8
OFF
Trunk line
DeviceNet cable
Tn
Subscriber n (node n)
DIP switches for
bus address and baudrate
english
Terminating
resistor
120 Ω
¼ W
51