Burkert 8695 Operating Instructions Manual page 47

Type 8695
AS-Interface installation
Figure 39: Open control head
→
Using the jumpers, assign the required color to the LEDs (see "Figure 38: Assignment of the end position
LED - AS-Interface").
NOTE!
Damage or malfunction due to penetration of dirt and humidity.
▶ To observe degree of protection IP65 / IP67, screw the transparent cap in all the way.
→
Close the device (assembly tool: 674078
The assembly tool (674078) is available from your Bürkert sales office.
7)
Transparent cap
Body casing
Connection housing
Actuator
).
7)
english
47