Electrical Installation As-Interface; Safety Instructions; Connection With Circular Plug-In Connector M12 X 1, 4-Pole, Male - Burkert 8695 Operating Instructions Manual

10.4

Electrical installation AS-Interface

10.4.1

Safety instructions

DANGER!
Risk of electric shock.
▶ Before working on equipment or device, switch off the power supply and secure to prevent reactivation.
▶ Observe applicable accident prevention and safety regulations for electrical equipment.
WARNING!
Risk of injury from improper installation.
▶ Installation may be carried out by authorized technicians only and with the appropriate tools.
Risk of injury from unintentional activation of the system and an uncontrolled restart.
▶ Secure system from unintentional activation.
▶ Following installation, ensure a controlled restart.
10.4.2 Connection with circular plug-in connector M12 x 1, 4-pole,
male
→
Connect the control head according to the table.
Bus connection (circular plug M12 x 1, 4-pole, male)
Figure 29: Circular plug M12 x1, 4-pole
Pin Designation
1 Bus +
2 NC
3 Bus –
4
NC
Table 8: Pin assignment of circular plug-in connector for AS-Interface
40
4
NC
Bus +
1
english
3
Bus -
NC
2
Configuration
AS-Interface bus line +
not used
AS-Interface bus line -
not used
Type 8695
AS-Interface installation