Technical Data; Standards And Directives; Operating Conditions - Burkert 2852 Operating Instructions Manual

4

TECHNICAL DATA

4.1

Standards and Directives

The device complies with the relevant EU harmonisation legislation. In addition, the device also complies
with the requirements of the laws of the United Kingdom.
The harmonised standards that have been applied for the conformity assessment procedure are listed in
the current version of the EU Declaration of Conformity/UK Declaration of Conformity.
4.2

Operating conditions

Operating mode
Materials
Installation position
Ambient temperature
Medium temperature
Storage temperature
Degree of protection (EN 60529 / IEC 60529)
Protection class
(according to VDE 0580)
Medium
10
Type 2852
Technical data
see data sheet
see data sheet
Any, preferably actuator face up
+5...+50 °C
+5...+50 °C
−10...+65 °C
IP10 (if connected using a JST plug)
IP50 (if connected with strands)
III
Gases
Further information on testing the chemical resist-
ance of wetted materials can be found in the Bürkert
resistApp