Burkert 8695 Operating Instructions Manual page 63

Type 8695
Disassembly
2. Electrical connection
DANGER!
Risk of electric shock.
▶ Before working on equipment or device, switch off the power supply and secure to prevent reactivation.
▶ Observe applicable accident prevention and safety regulations for electrical equipment.
→
Loosen the circular plug-in connector.
3. Mechanical connection
→
Loosen the fastening screws.
→
Remove the control head upwards.
Figure 51: Disassembly the control head
Control head
Electrical connection
circular plug-in connector
Pneumatic connections
Fastening screws (2x)
Pneumatic connection to the
actuator
Actuator
Series 21xx
(Element)
Series 20xx
(Classic)
english
63