11.13 Display elements DeviceNet
Figure 48:
Display elements - DeviceNet
NOTE!
Breakage of the pneumatic connection pieces due to rotational impact.
▶ When unscrewing and screwing in the transparent cap, do not hold the actuator of the process valve but the
connection housing.
Figure 49:
Open control head
NOTE!
Damage or malfunction due to penetration of dirt and humidity.
▶ To observe degree of protection IP65 / IP67, screw the transparent cap in all the way.
58
english
End position LED green
Device status LED (two-colored: red/green)
End position LED yellow
Status LED (yellow)
Bus LED (two-colored: red/green)
Valve LED yellow (pilot valve)
Transparent cap
Body casing
Connection housing
Actuator
Type 8695
DeviceNet installation