Product Disposal; Ems Technical Support; Warranty - EMS DOLORCLAST Instructions For Use Manual

13. PRODUCT DISPOSAL

The product must not be discarded in domestic
household waste.
Should you wish to definitively dispose of the
product, please comply with the applicable regulations
in your country.

14. EMS TECHNICAL SUPPORT

Ensure that the device and the accessories have
been used in accordance with the conditions
specified by EMS.
To improve our quality of service, please provide
the following information:
• Product reference number,
• Batch number/serial number,
• Service history of the device (e.g., previous
issues or repairs).
Please contact your EMS authorized service center for
any product servicing or repairs. You must complete the
appropriate EMS form in order to be issued with a Return
Material Agreement (RMA) number.

15. WARRANTY

The warranty is void if the device has been used with
non-original EMS instruments and handpieces. The
warranty is void if the device has been opened.
EMS and the distributor of this device accept no liability
for direct or consequential injury or damage resulting
from improper use, arising in particular through non-ob-
servance of the instructions for use, or improper prepa-
ration and maintenance.
00_FB-656_10_rev_A_IFU_Dolorclast RSW.indb 37 00_FB-656_10_rev_A_IFU_Dolorclast RSW.indb 37
Keep the original packaging until the product is to be
disposed of permanently.
Waste Electrical and Electronic Equipment belonging
to customers located in the European Union may be
shipped to EMS for recycling in accordance with the
WEEE regulations. The costs of recycling, exclusive of
shipping fees, are covered by EMS.
EMS declines responsibility for the safety of the device
and declares the warranty null and void if service or
repair is carried out by an unauthorized third party or if
non-genuine spare parts are used.
It is mandatory to return your product in its original
packaging. By following these packaging guidelines,
your product shall be protected against damage during
shipment. To protect the personnel of the EMS authorized
service center and for safety reasons during transport
and shipment, all products and accessories returned to
the factory for repair or servicing must be cleaned and
disinfected in accordance with the instruction manual.
Repair can be refused for products or accesso-
ries received in a contaminated condition.
When sending your product directly to the EMS autho-
rized service center, please include the name of the
distributor to simplify processing.
37
25/03/2021 17:07 25/03/2021 17:07