Getting Started; Starting The Device; Interfaces - EMS DOLORCLAST Instructions For Use Manual

3. GETTING STARTED

3.1. STARTING THE DEVICE

The mains power switch of the product must be
accessible at any time, to allow disconnection of
the device.
1. Use the mains power switch located on the left side
panel to switch on the console.

3.2. INTERFACES

3.2.1. Console Screen
REF
1 Pressure (from 1 to 4 bar), increment of 0.1 bar
2 Frequency (from 1 to 25 Hz), increment of 1 Hz
3 Impulses remaining in treatment
4 Selected preset protocol
This is not a touchscreen. Use the buttons on the console to navigate the menus.
00_FB-656_10_rev_A_IFU_Dolorclast RSW.indb 11 00_FB-656_10_rev_A_IFU_Dolorclast RSW.indb 11
2.0
1
bar
15
2
Hz
2500 3
Impulses
4
SMART PROTOCOL
Figure 13
DESIGNATION
Figure 12
11
25/03/2021 17:07 25/03/2021 17:07