EMS DOLORCLAST Instructions For Use Manual page 30

3. Fit the large wrench on the applicator and hold the
support with your hand. Turn the wrench to loosen
the nut.
4. Finish unscrewing the nut manually and remove it
from the applicator. Lift the applicator to access the
O-rings.
5. To replace the O-rings, you need to remove them one
by one. Remove the first large O-ring.
30
00_FB-656_10_rev_A_IFU_Dolorclast RSW.indb 30 00_FB-656_10_rev_A_IFU_Dolorclast RSW.indb 30
Figure 71
Figure 72
Figure 73
6. Remove the nose.
Figure 74
7. Remove the second large O-ring.
Figure 75
8. Remove the small O-ring.
Figure 76
25/03/2021 17:07 25/03/2021 17:07