Preset Protocols; Description Of Preset Protocols; Selecting The Preset Protocols; Adjusting The Preset Protocols - EMS DOLORCLAST Instructions For Use Manual

5. PRESET PROTOCOLS

5.1. DESCRIPTION OF PRESET PROTOCOLS

You can use preset protocols as a starting point instead of adjusting each setting manually. Preset protocols are
available to help you target treatment and increase efficiency.
Preset protocols are classified into six families:
PRESET PROTOCOLS
SMART Protocol (Default)
Tendinopathy
Enthesopathy
Joint & Bone
Skin
Recovery
Muscle

5.2. SELECTING THE PRESET PROTOCOLS

1. To select a preset protocol, use the
buttons. The name of the preset protocol is shown on
the display along with the associated factory settings.
2. Press the trigger on the handpiece to start treatment.
20
00_FB-656_10_rev_A_IFU_Dolorclast RSW.indb 20 00_FB-656_10_rev_A_IFU_Dolorclast RSW.indb 20
FACTORY SETTINGS
2 bar / 15 Hz / 2500 impulses
1.5 bar / 15 Hz / 3000 impulses
1 bar / 15 Hz / 3000 impulses
2 bar / 15 Hz / 3000 impulses
2.5 bar / 20 Hz / 3000 impulses
2.5 bar / 25 Hz / 4000 impulses
2 bar / 25 Hz / 4000 impulses
and
1.0
bar
15
Hz
3000
Impulses
ENTHESOPATHY
Figure 38
Table 2

5.3. ADJUSTING THE PRESET PROTOCOLS

You can modify a preset protocol to adapt the
treatment.
1. To adjust the settings of a given preset protocol
according to the patient's treatment, first select the
preset protocol.
2. Use the and
For more information about how to adjust the set-
tings, refer to the "Treatment Settings" section.
3. The new settings are displayed and an asterisk *
appears after the protocol's name to specify that this
preset protocol has been customized.
buttons to adjust the settings.
2.5
bar
15
Hz
2500
Impulses
ENTHESOPATHY*
Figure 39
25/03/2021 17:07 25/03/2021 17:07