ENGLISH
For any need, please contact Angelo Po's
agents or headquarters, which can be found
in the contacts section of the website http://
www.angelopo.com.
TECHNICAL INFORMATION
"GENERAL DESCRIPTION OF
See section
THE APPLIANCE"
of the User instruction man-
ual.
"OPTIONAL ACCESSORIES"
See section
the User instruction manual.
"SAFETY INSTRUCTIONS AND
See section
WARNINGS"
of the User instruction manual.
NOTE
: Carefully read the hazards
mentioned in section "Hazards and safety
provisions during servicing" of the "user
instruction manual".
Keep the appliance at peak effi ciency by car-
rying out the scheduled servicing procedures
recommended by the Manufacturer. Proper
servicing will ensure the best performance, a
longer working life and constant maintenance
of safety requirements.
WARNING
: Before carrying out any
servicing procedure, activate all the safety
devices provided and decide whether staff
at work and those in the vicinity should be
"TROUBLESHOOTING"
See section
User instruction manual.
6
SERVICE REQUEST PROCEDURE
GENERAL DESCRIPTION OF THE APPLIANCE
OPTIONAL ACCESSORIES
SAFETY INSTRUCTIONS AND WARNINGS
SERVICING
SERVICING INSTRUCTIONS AND WARNINGS
FAULTS
TROUBLESHOOTING
of the
TECHNICAL INFORMATION
When requesting service, state the data indi-
cated on the nameplate and provide a descrip-
tion of the fault.
of
informed. In particular, turn off the water
supply tap, cut off the electricity supply us-
ing the switch disconnector and prevent
access to all devices that might cause un-
expected danger and damage to people's
health and safety if activated.
Every 100 operating hours have skilled, autho-
rised personnel carry out the following opera-
tions:
– Check that the safety thermostat is working
correctly.
– Check that the electrical system is in good
working order.
3386350_inst_GB