General Settings; Date And Time - urmet domus 1097 User Manual

General settings

Select the first item in the side menu to access the general settings of the system as shown in the figure.
This can be used to edit the system date and time, the date/time format, the video format, the automatic logout and the HVR
operating mode.
•
Device Name: Enter the name of the HVR. The name may include both letters and numbers.
•
Device ID: Enter the HVR ID. The device ID is used to identify the HVR and can only consist of numbers. For example,
2 HVRs are installed in the same place. The device ID is 000000 for one of the HVRs and 111111 for the other HVR.
Select the value (i.e. days) between the suggested options. If you want to control only the HVR with Device ID 111111,
you can enter Device ID 111111 on the login page to perform further operations with the remote control.
•
Language: Select the desired system menu display language. Multiple languages are available.
•
Video Format: Select the correct local video standard.
•
Menu Timeouts: Click on the drop-down menu to select the time frame after that the HVR will exit the Main Menu in
case of inactivity. To disable this function, select "OFF" (password protection will be temporarily excluded).
•
Web Session Timeouts: Enter the time in minutes after that the web session will exit and ask for access credentials.
Exiting the web session can be disabled for Preview/Playback only.
•
Mode: Two modes can be set:
▪
Record Channel: this section can be used to define that channels, analogue and/or IP, belong to the selected
Disk Group. The "Select all" and "Invert Selection" all buttons can be used to add all the available channels to
the group or invert the selection made.
▪
Analog Channels: if the option is active, it can be used to add the channels related to analogue cameras to
the group.
•
Show Wizard: Click on the check box if you want to display the Startup Wizard every time you turn on or restart the
HVR.
Note:
➢
For technical details regarding resolution, see "Section 6 - 1097/574 1097/578 and 1097/576 specifications (PAL
format)" and "Section 7 - 1097/624 1097/628 and 1097/626 specifications (PAL format)".

Date and Time

1. Date and Time: The date and time can be set.
DS1097-024C 121