IP CAMERA MAINTAIN
This menu can be used to update the IP camera firmware and restore its default settings.
Upgrade IP Camera
•
Select the IP camera the firmware of that you want to update.
•
Click on the Select File button to select the file to be loaded on the USB flash drive, then click on OK.
•
Click on the IPC Upgrade button to start the upgrade. For authentication, you will need to enter the Administrator
password. DO NOT turn off the HVR and IP camera or remove the USB flash drive during the update.
Load Default Settings for IP Camera
This function can be used to restore the default settings of the IP camera.
•
Select the IP camera the default settings of that you want to update.
•
Click on Load Default to restore the settings. For authentication, you will need to enter the Administrator password.
Reboot IPC
This function allows you to reboot the IP camera.
DS1097-024C
130