Table of Contents
Advertisement
Upgrade
This function can be used to update the HVR firmware.
•
Copy the firmware file (.sw file) to the USB flash drive and insert it into the USB port of the HVR.
•
Click on the Select File button to select the firmware file on the USB flash drive, then click on OK.
•
Click on the Upgrade button to start the system upgrade. The system update will take about 5-10 minutes: DO NOT
turn off the HVR or remove the USB flash drive from the HVR during the firmware update.
Parameter Management
You can export and main menu settings on a USB flash drive or import a configuration file exported from a USB flash drive
to the HVR.
•
Save Settings: Click to save the current HVR system settings to the USB flash drive. For authentication, you will
need to enter the Administrator password.
•
Load Settings: Once you have created the system settings export, you can import them to another HVR. Click on
the Load Settings button to access the system settings file that you want to import from the USB flash drive. For
authentication, you will need to enter the Administrator password.
DS1097-024C
128
Advertisement
Table of Contents
