•
IO: A time slot marked black means that there is no recording scheduled for the time slot.
•
PIR: A purple time slot indicates the channel records only when the sensor is triggered during the time slot.
•
No Record: A black time slot indicates that there is no recording scheduled for the time slot.
When the program is complete, click on the Save button.
Alternatively, click on the Default button to use the system default parameters.
ALARM CONFIGURATION
This section is dedicated to the set notifications for different alarm events (Motion, PIR, IO Alarm, Intelligent Analysis, PTZ
Linkage, Exception, Alarm Schedule) used by the HVR for recording and notifying alarms. The submenu is:
➢
Motion
➢
PIR
➢
IO Alarm
➢
Intelligent Analysis
➢
PTZ Linkage
➢
Exception
➢
Alarm Schedule
MOTION ALARM SETTING
Select Motion from the side mention to open a page for defining the methods and actions to be started if a motion alarm is
detected.
Here is a brief description:
•
Channel: This is used to select the channel with that the motion detection function is associated.
•
Buzzer: This can be used to set for how long and when to enable the buzzer when motion is detected
•
(Disable, 10sec, 20sec, 40sec, 60sec).
•
Alarm Out: This can be used to match the correct external alarm sensor number.
•
Latch time: This can be used to set the external sensor alarm time when motion is detected (10sec, 20sec, 40sec,
60sec).
•
Record: This can be used to select the channels to be recorded following the alarm detected by the NVR
from the displayed list.
•
Post Recording: This can be used to set the recording time at the end of the Motion alarm (10sec, 30sec, 1min,
2min, 5min).
•
Show Message: This is used to set the appearance of the icon on the screen when a motion alarm is detected.
For icon types, see section 3.2 Live interface and pop-up menu
•
Send Email: This can be used to send alarm images to the configured email addresses (for more information, see
3.9.3 Email).
•
FTP Picture Upload: This can be used to send the image to the FTP server in case of a Motion alarm event.
•
FTP Video to Upload: This can be used to send the video to the FTP server in case of a Motion alarm event.
•
Picture to Cloud: This can be used to send the picture to Cloud Server in case of a Motion alarm event.
•
Video to Cloud: This can be used to send the video to Cloud Server in case of a Motion alarm event.
•
Full screen: This can be used to set displaying the video in full-screen mode when Motion is detected.
DS1097-024C
51