Subscribe to Our Youtube Channel
Related Manuals for urmet domus 1093/004H
Summary of Contents for urmet domus 1093/004H
- Page 1 Mod. 1093 DS1093-095 H.264 WITH HDMI DVR Evolution 2.0 DVR Series 4CH Ref. 1093/004H 8CH Ref. 1093/008H 16CH Ref. 1093/016H 8CH Ref. 1093/018H 16CH Ref. 1093/019H USER MANUAL INSTRUCTIONS...
-
Page 2: Table Of Contents
Image recording ............................6 1.3.7 Privacy and copyright ............................ 6 Front Panel ..........................7 1.4.1 Ref. 1093/004H-008H-016H DVR Front Panel ....................7 1.4.2 Ref. 1093/018H-019H DVR Front Panel ....................... 8 Rear Panel ..........................9 1.5.1 Ref. 1093/004H-008H-016H DVR Back Panel ....................9 1.5.2... - Page 3 1093/004H - 1093/008H – 1093/016H Specifications (Pal Format) ............73 1093/018H and 1093/019H Specifications (Pal Format) ..............74 Maximum recording time with 500GB hard disk ................. 75 10.1 Ref. 1093/004H – 1093/008H – 1093/016H – 1093/018H – 1093/019H ....... 75 Appendix: Active X installation ........................78 DS1093-095...
-
Page 4: General Information
GENERAL INFORMATION This document describes how to install and use the URMET Evolution 2.0 DVR Series ref. 1093/004H – ref. 1093/008H - ref. 1093/016H – ref. 1093/018H – ref. 1093/019H. Read this manual which contains information for correct, safe use carefully. -
Page 5: Opening The Box
INPUT 100-240 Vac 50/60Hz 1.5 A max. ⇒ • OUTPUT ⇒ 12Vdc 2A for Ref. 1093/004H – Ref. 1093/008H – Ref. 1093/0016H • 12Vdc 5A for Ref. 1093/018H and Ref. 1093/019H ⇒ Quick Guide CD-ROM containing software and user manuals... -
Page 6: Warnings
PRIVACY AND COPYRIGHT The 1093/004H – 1093/008H - 1093/016H – 1093/018H – 1093/019H digital video recorder is a device for CCTV systems. Recording of images is subject to the laws in force in your country. Recording of images protected by copyright is forbidden. -
Page 7: Front Panel
FRONT PANEL 1.4.1 REF. 1093/004H-008H-016H DVR FRONT PANEL 16 17 Key title Item Remark Function & Description Indicator If the “Green” indicator is on the system is getting power Power Indicator normally. Receives IR signal from Remote Controller IR Receiver When the “Red”... -
Page 8: Ref. 1093/018H-019H Dvr Front Panel
1.4.2 REF. 1093/018H-019H DVR FRONT PANEL Key title Item Type Marks Function /Indicator When the “Red” indicator flashes it means HDD indicator the hard drive is being read or written to. Indicator If the “Green” indicator is on the system is Power indicator getting power normally. -
Page 9: Rear Panel
REF. 1093/004H-008H-016H DVR BACK PANEL Item Physical port Connection method Connect CH1-4 for DVR Ref. 1093/004H, CH1-8 for DVR Video input Re. 1093/008H, CH 1-16 for DVR Ref. 1093/016H (Virtual) video input device (BNC interface) Connect monitor output (BNC interface) -
Page 10: Ref. 1093/018H Dvr Back Panel
1.5.2 REF. 1093/018H DVR BACK PANEL Item Physical port Connection method Video input CH1-8 (Virtual) video input device (BNC interface) Video output Connect monitor output(BNC interface) Audio Input CH1-CH4 audio input (RCA interface); Audio Input CH5-CH8 audio input (RCA interface); Audio Output Audio output (RCA interface);... -
Page 11: Ref. 1093/019H Dvr Back Panel
1.5.3 REF. 1093/019H DVR BACK PANEL Item Physical port Connection method Connect CH1-16 (Virtual) video input (BNC interface) Video input Video output (UP) Main video output; (Down) Spot output (BNC interface) Audio input Connect CH1-4 audio signal input (BNC interface) Audio output Connect audio signal output, including spot main audio output and sequence audio output (BNC interface) -
Page 12: Remote Controller
REMOTE CONTROLLER Item Key title Key function Channel select 1-8; Numeric key Numeric key; Clicking numeric “0” allow you switch to 9、 、 、 、 0 GUI (Graphical user Interface) function Multiple display mode Menu Enter into Main menu/Exit Up arrow key, Volume adjust ▲... -
Page 13: Remote Controller For Ref. 1093/019H
REMOTE CONTROLLER FOR REF. 1093/019H Key Title Key Function Press the button to enter into manual record. SEARCH Press the button to enter into record search menu 2× × × × 2 Enter into Quad display 3× × × × 3 Enter into 9-split display 4×... -
Page 14: Mouse Operation
MOUSE OPERATION Except using buttons of front panel or remote controller, you also can use mouse to perform system operation. TYPE Function In menu lock mode, Enter into pop-up menu and clicking any sub menu to pop up Log-in window; on menu unlock mode, enter into pop-up menu, and then clicking left key to enter into any sub menu directly. -
Page 15: System Initialization
Press and Hold ” ” REWIND Button (i.e. the Selection Button in right position of DVR Front Panel) for DVR Models Ref. 1093/004H, Ref. 1093/008H and Ref. 1093/016H. Release the button after audible warning. Press and Hold ”0” Button (Numeric Button on DVR Front Panel) for DVR Models Ref. 1093/018H and Ref. -
Page 16: Live Interface And Pop-Up Menu
LIVE INTERFACE AND POP-UP MENU After finishing initialization the system will enter into <Live> screen. The Picture above is the Multi-split display defaulted by system, which is showing no video input status. Once there are video inputs, the screen will display live images from the cameras. -
Page 17: Main Menu Guide
MAIN MENU GUIDE After finishing system initialization, click right key of mouse on main interface mode to enter into Pop-up Menu. Now you could perform parameter setting and operate on Main Menu, Multi-Pics, PTZ, PIP, Rec. Search, Mute, Manual record, Start Rolling, Start Cruise and Vout Switch etc. -
Page 18: Main Menu
MAIN MENU On <Live> mode, click [Menu] button on the front panel or Remote controller to enter into Main menu interface shown as above. And also you can click [ ] icon to enter the main menu screen. In Main Menu mode, you can control device management settings, such as Display, Record, Network, Search, Device, System and Advanced setting etc. -
Page 19: Output Mode
2.4.1.2 Output mode Click [Live] to pop up the interface shown as below. Now you could perform channel sequence setting. Go to [Main menu Display Output] to enter into the output set interface shown as below. Click [LIVE-OUT] in the Video Output option and set relative parameters shown as below for Main Video Output. Click [SPOT-OUT] in the Video Output option and set relative parameters shown as below for Spot Video Output. -
Page 20: Privacy Zone
2.4.1.3 Privacy Zone The function Allow you setup privacy zone parameters according to Picture below. Each channel could set up to four privacy zones, and please follow below steps to set: 1. Select the area no (Area 1 ~ Area 4); 2. -
Page 21: Schedule
2.4.2.2 Schedule Click [Main Menu Record Schedule] to enter into the interface shown as below. Channel: This option allows you select one channel you desired. It is possible to change the channel selecting “Next”. • Week: This option allows to select the week-day. It is possible to change the day selecting “Next”. •... -
Page 22: Search
2.4.3 SEARCH 2.4.3.1 Record Search Click [Main Menu Search Record Search] to enter into the interface shown as below. Channel: allows you select the channel(s) you desire to search. • Date Search: In the Video Search screen, user can search for all the records in a specific date. To execute a video search, •... -
Page 23: File Backup
(First Page): go to the first page on the list. When you view other pages, clicking [First] button brings you back to Page one. (Previous page): go to the previous ones of current page. Clicking [Pre] button will take you back the previous ones of current page (except the first page). -
Page 24: Media Player Backup
2.4.3.7 Media Player backup Copy one backup file to your PC. Open Playback player and click “+” icon or button to find/select the backup file, and then click [open] button. Highlight the file you have selected and click [Play] button. ：... -
Page 25: Log Search
2.4.3.8 Log Search Go to [Main menu Search Log] option to enter into the Log search interface shown as below. Herein allow you preview the log information you have searched. And click [Backup] to export all the log information which is listed. - Page 26 UPnP (Universal Plug and Play) function: If router supports UPnP function and set <UPnP> to “On”, system will • automatically forward port to router. DNS Function: DNS server is generally provided by local ISP. Herein please enter the IP address of your DNS. •...
-
Page 27: Router's Port Forwarding
When selecting PPPoE form the Type, user can input user name and password provided by ISP and set Media and Web port. And now you can visit your remote DVR by using the IP address captured after registering a domain name and web port and connect to your DVR via public network. -
Page 28: Email Set
Frame rate: allow you set net transmittal frame rate. User could select the relative value by pull-down menu. • Bit rate: allow you set net transmittal bit rate. User could select the relative value by pull-down menu. • Audio: When tick-selecting the option, system will record video and audio simultaneously. •... -
Page 29: Ddns Set
It is possible to schedule the sent Emails for Channel and Weekday about Events Detection (i.e. Motion, Alarm or Exceptions) as shown in picture below: 2.4.4.5 DDNS Set DDNS (Dynamic DNS) is a service that register a domain name and the floating IP address with the DDNS server so that the domain name can be routed to the IP address even if the IP address is changed in a dynamic IP system. -
Page 30: Symbian System Mobiles
Click the program “Aseesetup” shown as Picture 1 and choose an installation location shown as Picture 3 after the initialization. Click [Install] button to start the installation processing shown as Picture 2. After finishing the installation, click the icon named “Asee” shown as Picture 4 to run the program. Now you are allowed to enter into the program screen shown as Picture 5. - Page 31 Picture 7 Picture 8 Picture 9 Click the program “ASee_AL_3rd _0723.sisx” to start the installation shown as Picture 8 Choose Phone memory or SD card as an installation location shown as Picture 9. Click [Continue] button to make sure the application program you installed may visit network or dial phone when popping-up the dialog box shown as Picture 10.
-
Page 32: Ios Mobile
Picture 14 Address: herein indicate public IP address connected to DVR or dynamic domain name used by DVR. Port: indicate the server port which has been set to your DVR. User’s Name: here in input the user name which has been set on DVR-[Mobile Set] menu. Password: herein input the password which has been set on DVR-[Mobile Set] menu. - Page 33 (3) We have introduced Monitor point setting in the previous Symbian and Windows system setting. The setting method for Iphone is same as the Symbian and Windows system. Please refer to the previous section. Picture 17 ① Enter device title ②...
- Page 34 Add and delete device Device manager allow you add or delete device, and also modify device properties. Tab "Device Manager" on Main Menu to open this interface as below To add a new device, click "Add" button at the top right, then you can input the device name, address(IP or domain name), port, user name and password etc.
- Page 35 2. Open a channel Tab Cross button on one of the view window will enter channel list window, then select one channel to open on the previous window. Remote Playback Tab Remote Playback on Main Menu will show the playback entry. you will be able to play one channel of remote device after 2 steps.
- Page 36 2. Select date When you have selected channel, all the date with record will be mark-on dot. Just tap the date to playback one day record. Recording streaming You can record streaming when viewing live video. Tap and then tap channel label on the bottom panel to start recording. It will keep recording on live page after start record, and can only record the channels which are viewing.
-
Page 37: Blackberry Mobile
2.4.4.6.4 Blackberry mobile Download and install the Blackberry Desktop Manager on your PC Connect your Mobile to your PC via USB cable Open the Desktop Manager Choose [Application Loader] from the Main Menu shown as Picture 18 Click [Start] Button on the [Add/Remove application] menu shown as Picture 19 Click [browser] button and tick-select [ASee.alx] file shown as Picture 20 Click [Finish] button to finish the installation shown as Picture 21. - Page 38 ④ Setup ⑤ Help ⑥ Next CHs Group ⑦ PTZ Control Enter the Monitor DVR info in the below Setup Menu； Picture 25 Picture 26 4.1 Select the Network Type supported by Blackberry phone. Picture 27 4.2 Click [Save] button to save the above setting, and system will return back to Live display.
- Page 39 4.5 When selecting [Edit] option, system will allow you edit the history record. 4.6 When selecting [Delete] option, the history record will be deleted. Picture 29 Picture 30 5) Click [Next Page] icon to search [Channel] option shown as Picture 31 and Picture 32, and then choose the channel you want to display.
-
Page 40: Android Mobile
2.4.4.6.5 Android Mobile About Android Platform are available 2 App. Asee Software Mobile that use Mobile Port and iUVS Software that use Data Port. Here follow the App description: Please make sure the software environment support on your Android Mobile, such as Apkinstaller. Make sure your mobile have been connected to network and could download the software. - Page 41 CHs Select PTZ Direction Zoom+/- Focus+ - Iris +/- Function buttons from left to right in turn are: Play/Pause, Snapshot, setup, Next CHs Group and help. 11. Setting Menu Picture 49 Address: Enter the IP address of the DVR Port: Enter the Mobile Port No. Of the DVR Device Name: Enter DVR name (User defined) User ID: Enter the User’s Name Password: Enter the User’s Password...
- Page 42 Add and delete device Device manager allow you add or delete device, and also modify device properties. Tab "Device Manager" on Main Menu to open this interface as below To add a new device, click "Add" button at the top right, then you can input the device name, address(IP or domain name), port, user name and password etc.
- Page 43 1. Open a device to open device list as below, then select one of devices in the list, will open all channels of it automatically. 2. Open a channel Tab Cross button on one of the view window will enter channel list window, then select one channel to open on the previous window.
- Page 44 Remote Playback Tab Remote Playback on main menu will bring up a calendar view which uses black point to presents the day of month there is Record Videos. Press 'Select Channel' button to retrieve the Record Videos of channel from device. PTZ control PTZ is Pan-Tilt-Zoom and reflects the movement options of the camera.
-
Page 45: Alarm
2.4.5 ALARM 2.4.5.1 Motion Click [Main menu Alarm Motion] to enter into the interface shown as below Channel: allow you enable/disable the motion function for any channel. Area: Click the [Setup] button to enter into area setup interface shown as below. •... - Page 46 No: allow you select one desired channel • I/O Status: allows you select the three options – NO (Normal Open), NC (Normal Close) and OFF. Set to “Normal Open”, I/O • status Alarm will be activated while sensor is ON; set to “Normal Close”, I/O status alarm will be activated while sensor is OFF;...
-
Page 47: Device
2.4.6 DEVICE 2.4.6.1 HDD Set Click [Main menu Device HDD] to enter into the interface shown as below. When DVR is connected to a HDD, the system will automatically detect if HDD is normal or not; If the cable connected to HDD is loosen or HDD is abnormal, HDD status will be shown as “No Disk”, or, If HDD need to be formatted, status will be shown as “no format”, otherwise, the HDD status will be shown as “Normal”... -
Page 48: Ptz Set
2.4.6.2 PTZ Set Click [Main Menu Device PTZ] to enter into the below window shown as below. You could select the channel you desire to control and set PTZ protocol (Pelco-D or Pelco-P), Baud Rate (1200, 2400, 4800, 9600), Data bit (8, 7, 6, 5), Stop bit (1, 2), Parity Check (None, Odd, Even, Mark, Space), Address Code and Cruise status respectively. -
Page 49: Dst Set
2.4.7.2 DST Set Enter into the interface shown as above and you are allowed to set DST status and mode. NOTE: In Southern Hemisfere DST can be set manually each year with Daylight Saving Time set as “by day”, if “by week”... -
Page 50: Information
Click [Edit] button to enter into the [User Edit] interface shown as below: User name consist of eight characters, password consist of 0~8 and its fixed-length is 6 bit. Note: The user can change the own Password without Administrator’s authorization. The Max. -
Page 51: Advanced
2.4.8 ADVANCED 2.4.8.1 Maintain Click [Main menu Advanced Maintain] to enter into the maintain interface shown as below. Auto Maintain: You can enable the auto maintain function regularly as per user’s need. • Auto Reboot: you can also set system auto reboot regularly (daily/weekly/monthly) as per user’s need. •... -
Page 52: Menu Lock
MENU LOCK Considering a system safety feature you can click [ ] icon to lock system interface when leaving the DVR. If you want to login to the DVR again, you would input device code and password to unlock the interface shown as below. Friendly Reminder: Administrator has full authority over Main Menu operations and has an authority to limit common user’s operation. -
Page 53: Start/Stop Cruise
START/STOP CRUISE If multiple presets are specified, the PTZ camera will automatically move to the entire preset one at a time whilst user activates [Start Cruise ] options. If you want to stop cruise, please click [ ] icon on the [Tool] column. DIGITAL ZOOM This option allows to select a channel in full screen mode and zoom in on the image in LIVE mode. -
Page 54: Plug-In Download And Installation Web Interface
PLUG-IN DOWNLOAD AND INSTALLATION WEB INTERFACE Open your web browser and input the IP address and web port of DVR, such as: http://IP Address:Web Port/ . If your computer is connected to internet, it will download and install “ActiveX” Plug-in automatically. If your computer system is Vista, you may need to setup the user authority. -
Page 55: Web Application Manager Log-In
WEB APPLICATION MANAGER LOG-IN After plug-ins installation, please input user name, password and client port; and select the Stream Type <Main stream> or <Sub stream>. After that select the Language and then allow you tick-select <Open All Channels Preview>; Now you click [Log-in] button, and then you are allowed to access a remote DVR and monitor live video images using Web browser anytime from virtually anywhere. -
Page 56: Menu Bar
3.2.1 MENU BAR Menu bar include [Live], [Replay], [Configuration], [Path Configuration] and [Logout] options 3.2.1.1 Live Display After running the Web Application Manager on your local PC, system will be defaulted to enter into <Live> interface shown as above. You can click [Play] button to Open/close live images and enter into on-spot record and Capture, quad, 9-split or 16-split mode by operating the control bar on the bottom of screen. -
Page 57: Ptz Control
3.2.1.2 PTZ Control PTZ moving Direction control: allow you control PTZ camera’s direction. And the middle button is called [Auto-cruise] button. PTZ speed control bar : Iris, Focus and Zoom control : Preset setting/clear; Start cruise /stop cruise 3.2.1.3 Video control Adjust video Hue;... -
Page 58: Playback
3.2.2 PLAYBACK Click [ ] icon to enter into <playback> interface shown below. The Web Application Manager supports up to 4 channels playback simultaneously. 3.2.2.1 Record search Firstly, select one day you want to check and tick-select <synchronous Playback> and the channels you desire to playback shown as below DS1093-095... -
Page 59: Playback Control
Secondly, select record type (Normal record, Alarm record and All) and then click < > button shown as below. On the time axis, red part stand for alarm record, yellow stand for normal record and original part stand for no record during this period. If you tick-select <... -
Page 60: Record File Clip
3.2.2.3 Record file clip After opening playback, click [ ] icon to clip the selected file; and click again to stop the clip function. Record clip file will be saved as *.264 format. 3.2.2.4 Snapshot function Move the mouse curse to the channel you want to capture, and click [ ] icon to capture the live images remotely. -
Page 61: Display Configuration
3.2.3.1 Display Configuration Unfold [Display] option to find its sub-options: Live and Privacy zone 1、Live: Allow you modify channel name, Position, Live channel, Show time and Record time. If show time is set to <disable>, current system time will not appear on the screen on Live mode; and if record time is set to <off>, system time can’t be found in the record file. -
Page 62: Network Parameters
Schedule: Detailed parameters please refer to DVR local setting. Green stand for Normal record; Yellow stands for Motion detection; Red stands for I/O triggered record. Main Stream: detailed settings please refer to DVR local setting. Herein allow user modifies the resolution, frame rate, Bit rate and audio of the record channel. - Page 63 DHCP: Set network type to “DHCP” shown as below. Relative parameters should be consistent with DVR local setting. Set network type to “PPPoE”: Its user name and password should be consistent with DVR local setting. 2、 Sub stream: Relative parameters should be consistent with DVR local setting. DS1093-095...
- Page 64 3、 Email setting: Click [Email setting] option to allow you set alarm email configuration parameters shown as below. Detailed parameters should be consistent with DVR local setting. 4、 Mobile: Its user name, password and port No should be consistent with DVR local setting shown below. 5、...
-
Page 65: Alarm Set
3.2.3.4 Alarm Set Click <Alarm> option to unfold its sub-options: Motion, I/O Alarm shown as below. 1、 Motion Detection: allow you configure its <Sensitivity>, <Alarm out>, <Alarm record> and <Alarm Capture> etc. Details setting should be consistent with DVR local setting. 2、... -
Page 66: Device
3.2.3.5 Device Click <Device> to unfold its sub-options: HDD and PTZ. HDD: allow you check out HDD status and overwritten time shown below. Detail setting should be consistent with DVR local setting. PTZ Configuration: details setting should be consistent with DVR local setting. 3.2.3.6 System Click <System>... -
Page 67: Advanced
Users: Allow you configure user name and password shown below. Details setting should be consistent with DVR local setting. 2、 Information: Allow you check out device name, number, type, MAC address, software version, IE version and hardware version shown below. 3.2.3.7 Advanced Click <Advance>... - Page 68 Please follow below steps to upgrade the system: Select the upgrade file’s path shown as below. Please note that the format of upgrade file is *.sw. Click <Start update>, now processing bar will display current upgrade status shown as below. 2、...
-
Page 69: Local Setting
3、 Exception: allow you configure abnormal type, buzzer output time, and alarm email and show message shown as below. Details setting should be consistent with DVR local setting. 4、 Maintain: allow you set auto system maintain for DVR remotely shown as below. Detail setting should be consistent with DVR local setting. -
Page 70: Record Alarm Setting
RECORD ALARM SETTING Please refer the below matrix: “；” stand for “only alarm but no record”; “AMR” stand for “alarm record”; “NLR” stand for “normal record”; and “NOR” stand for “ no record”. Once alarm is triggered, alarm icon will occur, and when many alarms are triggered, alarm remarks will occur on the screen. -
Page 71: System Connection Diagram
SYSTEM CONNECTION DIAGRAM 1093/004H DVR 4ch 1093/008H DVR 8 ch. DS1093-095... - Page 72 1093/019H - DVR 16Ch DS1093-095...
-
Page 73: 1093/004H - 1093/008H - 1093/016H Specifications (Pal Format)
1093/004H - 1093/008H – 1093/016H SPECIFICATIONS (PAL FORMAT) Characteristics Feature 1093/004H 1093/008H 1093/016H Compression formats Video: H.264 / Audio: 8kHz*16bit ADPCM 4-CH BNC Input/ 1-CH 8-CH BNC Input/ 1-CH 16-CH BNC Input/ 1-CH BNC Output BNC Output BNC Output Video Inputs/outputs... -
Page 74: 1093/018H And 1093/019H Specifications (Pal Format)
1093/018H AND 1093/019H SPECIFICATIONS (PAL FORMAT) Characteristics Feature 1093/018H 1093/019H Compression formats Video: H.264 / Audio: 8kHz*16bit ADPCM 8-CH BNC Input/ 1-CH BNC Output 16-CH BNC Input/ 2-CH BNC Output Video Inputs/outputs 1 CH VGA Output 1 CH VGA Output 1 CH HDMI Output 1 CH HDMI Output Audio I/O... -
Page 75: 10 Maximum Recording Time With 500Gb Hard Disk
10 MAXIMUM RECORDING TIME WITH 500GB HARD DISK 10.1 REF. 1093/004H – 1093/008H – 1093/016H – 1093/018H – 1093/019H The following resolution options can be selected on Urmet Evolution 2.0 DVR Series: “WD1”, ”WHD1” and “WCIF” on 1/4/8/16 analog Channels “D1”, ”HD1”... - Page 76 1 Record Channel in WHD1 (960×288) Resolution / 4 Record Channels in WHD1 (960×288) Resolution / HD1 (704x288) Resolution HD1 (704x288) Resolution Variables to be set Results Variables to be set Results Bitrate Frame rate HD Time HD Time Bitrate Frame rate HD Time HD Time...
- Page 77 1 Record Channel in WD1 (960×576) Resolution / 4 Record Channels in WD1 (960×576) Resolution / D1 (704x576) Resolution D1 (704x576) Resolution Variables to be set Results Variables to be set Results Bitrate Frame rate HD Time HD Time Bitrate Frame rate HD Time HD Time...
-
Page 78: Appendix: Active X Installation
APPENDIX: ACTIVE X INSTALLATION If the installation of an ActiveX component is required, follow the procedure below. Before performing the connection to the PC, activate IE protection configuration, following the procedure below: Double click the icon to open Internet Explorer browser. The following display will appear (or, however, the default page). -
Page 79: Ds1093
Select the area “Trusted sites”. Click on “Custom Level” and make sure that the Protection Level is set as “Low”. If the Protection Level is not set, set it as Low and click on “Re-Set”. Select OK to confirm. Click the item “Sites”. The following screen will appear. - Page 80 DS1093-095 Area tecnica URMET S.p.A. servizio clienti +39 011.23.39.810 10154 TORINO (ITALY) VIA BOLOGNA 188/C http://www.urmet.com e-mail: info@urmet.com Telef. +39 011.24.00.000 (RIC.AUT.) MADE IN CINA +39 011.24.00.300 - 323 DS1093-095...
Need help?
Do you have a question about the 1093/004H and is the answer not in the manual?
Questions and answers