Utc Control; Cruise Set - urmet domus 1097 User Manual

TDN AF
7
8
9
10
11
12
13
14 Total
15 No./Time
15
15
15
16
17 Preset List

UTC control

The UTC function (Up the Coax) allows the data transmission on the same coax cable used for video signals transmission.
No RS-485 serial connection is required for remote camera control. It is possible to open the OSD menu of the camera and
control the menu using the PTZ control buttons.
According to different camera Iris [+] or [central enter] buttons open the On Screen Display menu. The arrows buttons can
be used to select and to choose the different menu functions.
According to the type of camera, the OSD is displayed by the management of iris buttons or by pressing the central enter
button, using the arrows buttons you navigate the menu.
The last choice of the menu can be used to save and exit from menu.
IMPORTANT NOTE:
The UTC or UTC-Z function can be used according to the AHD camera model. To see that camera model to associate with
the UTC or UTC-Z function, see the specific documentation of the camera model available on the Urmet website.

CRUISE SET

Open Auto Cruise function on PTZ setting menu if you want to setup cruise function (system default: off) and set up Cruise
channel, Cur point and total quantity and stop time, etc.
How to set pre-set point
•
Total: set up pre-set point quantity
•
Cur Point: indicates starting point cruised. System default point is 01. The model support up to 255 pre-set points.
•
Time: sets the stop time at each point
DS1097-024C
Night/day
OFF: No focus for night/day switch or vice versa
switch focus
ON: Night/day switch focus and vice versa
and vice versa
Focus Autofocus if out of focus
Restore Restore Auto-Focus IP Camera
UTC Click UTC to setup page of UTC
Protocol Click on
A) Click on
Pointer Panel
B) Click up/down/left/right arrow to move the cursor in UTC OSD menu.
PRESET Click on
A) Click on
Pointer Panel
B) Click up/down/left/right to move and set preset points.
Total Display the total number of preset points
Number of preset point; Set the time how long the camera will stay in the
No./Time
preset point
Enter the number of a specific preset point, click this button to move your
Set
PTZ camera to the preset point
Delete Click to delete the selected preset point
Click to set a specific preset point on a PTZ camera.
Go to
You can add up to 255 preset points for the HVR.
Click
Start/Save
points
Preset List Preset List
and select Protocol.
to start/stop the UTC function.
to view the Preset configuration page.
to start/stop the preset on the cursor.
then click on
20
to save the settings and preset