Tag Setup - urmet domus 1097 User Manual

•
CALL: allow you to go to a specific preset point.
•
SET: allow you to set a set of specific preset points of a PTZ camera.
Note:
Use 95 to enter the OSD menu of the Speedome. Run the SET95 control if CALL95 does not work. See the Speedome
manual for the Speedome OSD.
1. Select a camera you desire to set a preset point.
2. Adjust the camera in the desired direction.
3. Click on [Set] to set the point as a preset point.
4. Click on [Save] to save the preset point.
5. Follow the above step to add one more preset point.
•
Save: Save all the preset points
•
Clear: This can be used to delete one selected preset point.
Note: Up to 254 pre-sets per one camera can be stored. However, the actual preset quantity differs depending on PTZ
performance.

TAG SETUP

Move mouse to any a live channel, then right-click to view tools bar. The Add Customized Tag icon is
Click on to view
then click on
be edited, for example:
DS1097-024C
. Set the Tag once, the Tag can record one minute, this is the default setting. Tag name may
,
21
.