Lpd (License Plate Detection) Beta Version - urmet domus 1097 User Manual

LPD (License Plate Detection) Beta Version

This menu allows rules to be set for detecting the number plate reading of vehicles in a database or unknown vehicles. The number
plate information of the unknown vehicle can also be backed up. The function supports European and American number plates.
Switch: Enable or disable the number plate reading detection function.
Setup: Press on to draw the virtual area on the image.
Channel: Choose the channel to be configured.
IVA Lines: Allows you to enable or disable IVA lines.
Snap Mode: There are three recognition modes, default mode, real-time mode, and interval mode.
- Default Mode: When the vehicle's number plate enters the monitoring area, the camera will always detect. After the vehicle
number plate has left the monitoring area, the best and clearest of the images captured during this time will be sent to the device.
- Realtime Mode: One image will be sent to the device at the moment the vehicle's licence plate enters the monitoring area and a
second image will be sent to the NVR when the vehicle's licence plate has left the monitoring area.
- Interval Mode: The maximum number of times and the interval for sending each image to the device can be set.
Snap number: The number of push images per number plate detection can be set from 1, 2, 3 up to unlimited, i.e. send images to
the device one, two, three or infinitely many times. (Note: this parameter is available in interval mode)
Snap Frequency: n s / pic (n can be set to 1-255), chooses the best snapshot every N seconds and sends it to the device. (Note:
this parameter is available in interval mode)
DS1097-024C 67