Ftp Schedule; Ip Filter - urmet domus 1097 User Manual

•
FTP Enable: Select the desired option to enable or disable the operation.
•
Server IP: Enter the address of the FTP server name.
•
Port: Port of the FTP service. Default value: 21.
•
Username: User name to access the FTP.
•
Password: Password for accessing the FTP server.
•
Picture Resolution: You can set the resolution of images sent to the FTP server.
•
Picture Quality: You can set the quality level of the pictures sent to the FTP server.
•
Video Stream Type: Select the stream type (i.e., mainstream, substream) for videos sent to the FTP server.
•
Max Package Interval: Select the interval for sending pictures/videos to the FTP server.
•
Directory Name: Name of the folder in that to transfer the recorded images or motion alarms.
•
Normal Video Upload: It is possible to enable or disable the option to send the normal video recording to the FTP
server.
•
Upload Alarm Video: It is possible to set the FTP video/image notification in case of an event (e.g. Motion, IO,
PIR, Intelligent).
•
FTP TEST: Click the FTP TEST button to check how the configuration works.

FTP Schedule

This configuration page can be used, as seen in the other cases, to select on that times and days of the week the HVR must
send the images/video to the FTP in case of a given event.
•
Channel: This can be used to select the channel to be configured.
•
Normal: Use this option to define the times at that to enable sending of images/videos in case of normal recording.
•
Motion: Use this option to define the times at that to enable sending of images/videos to the FTP in case of automatic
motion detection.
•
IO: Use this option to define the times at that to enable sending of images/videos to the FTP in case of sensor alarm
detection.
•
PIR: Use this option to define the times at that to enable sending of images/videos to the FTP in case of automatic PIR
detection.
•
In-Analysis: Use this option to define at what times you want to enable the sending of images/videos to FTP in case
of detection of Intelligent Video Analysis.
•
Default: This can be used to restore the default settings.
•
Copy: This is used to copy the current channel settings on another or on all other channels.
•
Apply to save the changes.

IP FILTER

IP Filter
You can configure IP FILTER for the HVR from Menu Start → Setup → Network → IP FILTER
DS1097-024C 98