Load Default; Reset Button - urmet domus 1097 User Manual

Log Searching and Backing Up:
•
Click on the field by the side of Start Date & Start Time to select the starting date and time of the displayed calendar
search.
•
Click on the field next to End Date & End Time to select the end date and time of the search from the displayed
calendar.
•
Select the type of events you are looking for from the drop-down menu next to Log Type or select All to view the
entire system log for the selected period.
•
Click on Search.
•
Browse system log events by search period:
▪
Video events can be played back instantly by clicking the Playback column. Right-click to return to the search
results.
▪
Use the
•
Click on Backup to create a backup of the system log for the period you are looking for. Check that the flash drive is
connected to the USB port of the HVR.
•
The backup drive menu appears. Go to the folder in that to save the backup file and click on OK to start the operation.

Load Default

Restore the HVR to factory settings. You can select to reset all settings at once or only the specific menu settings. Restoring
the default settings will not erase the recordings and snapshots saved on your hard disk.
Select all items to reset or check Select All to select all items. Click on Apply to load the default settings for the selected
items.

Reset Button

Put flag on Format HDD, it is possible to erase the recording when the RESET button is pressed to reset to factory settings (Load
Default).
DS1097-024C
/ buttons in the bottom right of the menu to switch between the system event log pages.
127