Table of Contents
Advertisement
2.9
NETWORK CONFIGURATION
The Network section of the Parameters menu can be used to access all the NVR settings for accessing the Internet and the
local area network (LAN), the email notification functions, the use of a DDNS (Dynamic DNS) etc.
The submenu is:
1.
General Settings
2.
DDNS
3.
Email
4.
FTP
5.
IP filter
GENERAL SETTINGS
The first time concerns the settings for configuring access to the IP network by the NVR; there are three available methods
for selecting the IP address and the respective parameters:
PPPOE
DHCP:
Static
After selecting the network mode (DHCP, PPPOE or Static) and setting the ports the Client Port
can be used to access the NVR locally or remotely, via a local network or the Internet.
Some parameters which are in common to all functions are available in addition to the specific parameters of each single
mode illustrated below.
2
Default value for the Client port: 9000
3
Default value for the HTTP port: 80
DS1098-028A
88
2
and the HTTP Port
3
this
Advertisement
Table of Contents
