Record Schedule; Capture - urmet domus 1097 User Manual

Record Schedule

This menu can be used to set the HVR video recording program and define the recording mode for each channel. It can be
used to define a daily and hourly schedule in normal (continuous) recording mode, motion recording, I/O alarm recording
and PIR recording (if supported by HVR). To set the recording mode, click on the radio button (Normal, Motion, Alarm, PIR,
Intelligent Analysis), then drag the cursor to mark the time slots. The registration program is only valid for one channel. Use
the Copy function if you want to use the same registration program for other channels. Click on Apply to save the settings.
•
Channel: This can be used to select the channel to set the recording parameters.
•
Normal: When the time slot is marked red, this indicates the channel records only when the sensor is triggered
during that time slot.
•
Motion: When the time slot is marked violet, this indicates the channel records only when the sensor is triggered
during that time slot.
•
IO: A time slot marked black means that there is no recording scheduled for the time slot.
•
PIR: A purple time slot indicates the channel records only when the sensor is triggered during the time slot.
•
No Record: A black time slot indicates that there is no recording scheduled for the time slot.
Click on the [Save] button once the program is completed.
Alternatively, click on the Default button to use the system default parameters.

CAPTURE

This subsection of the Parameters menu can be used to configure the parameters dedicated to the acquisition of images in
alarm conditions and to the programming of the time slots during that the function must be active.
DS1097-024C 49