Rsd (Rare Sound Detection); Statistics - urmet domus 1097 User Manual

Post Rec.: Set the duration of recording after the alarm event. You can set 30 seconds, 1,2,5 minutes.
Show Messagge: If selected, shows the alarm icon when it is generated.
Send Email: if enabled allows an email notification to be sent after the alarm has been triggered. It is necessary to configure the
e-mail data in the Remote Setup menu under E-mail Network.
FTP Picture Upload: If enabled, allows the alarm picture to be uploaded to the FTP server after the alarm has been triggered.
FTP Video Upload: If enabled, this allows the alarm video to be uploaded to the FTP server after the alarm has been triggered.
Picture to Cloud: If enabled, this allows you to upload the alarm picture to the cloud after the alarm has been triggered.
Video to Cloud: If enabled, this allows you to upload the alarm video to the cloud after the alarm has been triggered.
Full Screen: When the alarm is triggered, the channel will be displayed in full screen.
Voice Prompts: when the alarm is triggered the audio file will be played (The IP camera must support the voice prompt function).
Apply: to save the set parameters.

RSD (Rare Sound Detection)

This menu allows the configuration of RSD notifications.
Channel: Channel name
Buzzer: allows you to set the duration of the buzzer in the event of an alarm.
Alarm Out: If enabled, allows the alarm output to be switched after the alarm has been triggered.
Latch Time: Set the alarm time, a time period of 10s, 20s, 40s and 1 min is allowed.
Record: Press on and select the channel to be recorded after alarm activation.
Post Rec.: Set the duration of recording after the alarm event. You can set 30 seconds, 1,2,5 minutes.
Show Messagge: If selected, shows the alarm icon when it is generated.
Send Email: if enabled allows an email notification to be sent after the alarm has been triggered. It is necessary to configure the
e-mail data in the Remote Setup menu under E-mail Network.
FTP Picture Upload: If enabled, allows the alarm picture to be uploaded to the FTP server after the alarm has been triggered.
FTP Video Upload: If enabled, this allows the alarm video to be uploaded to the FTP server after the alarm has been triggered.
Picture to Cloud: If enabled, this allows you to upload the alarm picture to the cloud after the alarm has been triggered.
Video to Cloud: If enabled, this allows you to upload the alarm video to the cloud after the alarm has been triggered.
Full Screen: The channel will be displayed in full screen when the alarm is triggered.
Voice Prompts: when the alarm is triggered the audio file will be played (The IP camera must support the voice prompt function).
Apply: to save the set parameters.

STATISTICS

In this submenu, statistics can be viewed and exported according to the chosen intelligent video analysis function.
FR Statistics
It is possible to display face statistics based on a specific time period and represented in the form of a graph as shown in the figure
below:
DS1097-024C 81