Show message: check this box to display the corresponding alert icon on the live view screen when a combined alarm is detected.
Send Email: Allows an email to be sent to the specified address when the alarm is triggered.
FTP Picture Upload: Allows images of alarms to be uploaded to the FTP server when the combined alarm is triggered.
FTP Video Upload: Allows video uploads of alarms to the FTP server when the combined alarm is triggered.
Picture to Cloud: Allows uploading pictures of alarms to the Cloud when the combined alarm is triggered.
Video to Cloud: Allows uploading videos of alarms to the Cloud when the combined alarm is triggered.
Full Screen: When the combined alarm is activated, the corresponding channel will be shown in full screen mode.
Voice Prompts: Select the icon
necessary that the IP camera supports the voice prompt function).
PTZ LINKAGE
A connection may be established between a Speed Dome Camera (if present) and the Motion Detection alarm and/or the
I/O alarm sensor. This function can be used to move the Speed Dome Camera to the associated preset point when a motion
or sensor alarm is triggered.
•
Channel: To select the channel to be set.
•
Switch: This used to enable or disable the PTZ linkage function on and off
•
Motion: The motion detection alarm will activate the PTZ linkage function (if checked).
•
IO: The I/O detection alarm will activate the PTZ linkage function (if checked).
•
PIR: The PIR alarm will activate the PTZ linkage function (if checked).
•
PTZ1...4: Click on
•
Copy: This can be used to copy current channel parameters to any other channel or to all channels.
DS1097-024C
to set the function. The voice prompt will be played after the combined alarm is activated (it is
to associate the PTZ Dome camera with the preset points.
56