AD (Attribute Detection)
In this section, it is possible to configure possible actions related to the recognition of certain facial characteristics (e.g. presence
or absence of the mask).
Alarm Type: there are three types of alarm, close, no mask, with mask.
Buzzer: allows the duration of the buzzer to be set in the event of an alarm.
Alarm Out: if enabled, allows the alarm output to be switched after the alarm has been triggered.
Latch Time: Set the alarm time, a time period of 10s, 20s, 40s and 1 min is allowed.
Record: Press on
and select the channel to be recorded after alarm activation.
Post Rec.: Set the duration of recording after the alarm event. You can set 30 seconds, 1,2,5 minutes.
Show Messagge: If selected, shows the alarm icon when it is generated.
Send Email: if enabled allows an email notification to be sent after the alarm has been triggered. It is necessary to configure the
e-mail data in the Remote Setup menu under E-mail Network.
Voice Prompts: when the alarm is triggered the audio file is played (The IP camera must support the voice message function).
Apply: To save the set parameters.
DS1097-024C
75