Pd & Vd (Pedestrian & Vehicle Detection); Pid (Perimeter Intrusion Detection) - urmet domus 1097 User Manual

Press Save to store the desired time settings.
PD & VD (Pedestrian & Vehicle Detection)
This menu allows the configuration of PD&VD notifications.
Channel: Channel name
Buzzer: allows you to set the duration of the buzzer in the event of an alarm.
Alarm Out: If enabled, allows the alarm output to be switched after the alarm has been triggered.
Latch Time: Set the alarm time, a time period of 10s, 20s, 40s and 1 min is allowed.
Record: Press on and select the channel to be recorded after alarm activation.
Post Rec.: Set the duration of recording after the alarm event. You can set 30 seconds, 1,2,5 minutes.
Show Messagge: If selected, shows the alarm icon when it is generated.
Send Email: if enabled allows an email notification to be sent after the alarm has been triggered. It is necessary to configure the
e-mail data in the Remote Setup menu under E-mail Network.
FTP Picture Upload: If enabled, allows the alarm picture to be uploaded to the FTP server after the alarm has been triggered.
Picture to Cloud: if enabled, allows the alarm picture to be uploaded to the cloud after the alarm has been triggered.
Full Screen: The channel will be displayed in full screen when the alarm is triggered.
Voice Prompts: when the alarm is triggered the audio file will be played (The IP camera must support the voice prompt function).
Apply: to save the set parameters.

PID (Perimeter Intrusion Detection)

This menu allows the configuration of PID notifications.
DS1097-024C 77