CLOUD
The HVR can transfer the images and videos, captured by the cameras in case of alarm, to a Cloud storage service via
Dropbox and Google Drive, a free service that allows you to easily store and share snapshots and have them always at
hand when you need them. The configuration is accessible via the Cloud item in the side menu.
Before activating the Cloud function, it is recommended that you create a Dropbox or Google Drive account using your
chosen HVR email address and password. Go to the main Dropbox or Google Drive site, enter your name, email address
and password, accept the terms and conditions, then click on the Sign up button.
Go to [Main Menu→Device→Cloud] to open the following page.
SYSTEM
This section allows you to configure the functional parameters of the system. To access it, press "System" at the top of the
screen. The following subsections will appear in the menu below:
➢
General settings
➢
Multi-User settings
➢
Maintenance settings
➢
IP Camera Maintain
➢
Information
GENERAL SETTINGS
This area contains all the general settings of the HVR.
DS1097-024C
➢
Cloud Storage: the Cloud storage function can be
activated.
➢
Cloud type: You can select the Cloud type; the default
option is DROPBOX. Google Drive can also be used.
➢
Time trigger: This is the image loading frequency (OFF,
3min, 5min, 10min, 20min, 30min, 60min).
➢
Alarm detection: this function may be activated.
➢
Driver name: It will be available only when HDD has been
formatted. Total Space – Total size of the hard drive
currently installed.
➢
Activate Cloud: Click on this button to activate the Cloud
storage function.
➢
Advanced Email settings: Click on the button shown in
the figure to open the email parameter configuration
window (activate SSL, SMTP port, SMTP server, sender,
sender password, recipient).
120